Homa Collet Impeller Disassembly and Installation Bedienungsanleitung PDF herunterladen

Publication

88FN2010

Please Contact

Technical Support At 203

736

8890 With Any Additional Questions

Please Be Prepared To Provide Pump Serial Number During Call

Page

1 of 3

You will need:

-A torque wrench with a 40 foot pound (480 inch

pound) capacity

-Allen key socket and extension

-Liquid soap to lubricate o rings

Collet Impeller Disassembly

And Re

Assembly

Disassembly

• Remove impeller bolt and cover disc from

impeller. (A)

• Remove all screws from locking mechanism.

• Four holes in the locking mechanism are

threaded in the top layer . Insert four of the

screws into these holes and tighten them

progressively and equally in order to eject the

first layer of the mechanism. (B)

• The next layer of the locking mechanism also

has four holes that are threaded. Tighten four

screws in these in the same manner as before

to remove the second piece.(C)

• After the second layer of the mechanism is

removed, the impeller should come off freely

and easily.

1 2 3

Publication 88FN2010 Please Contact Technical Support At 203-736-8890 With Any Additional Questions Please Be Prepared To Provide Pump Serial Numb

Seite 2

Publication 88FN2010 Please Contact Technical Support At 203-736-8890 With Any Additional Questions Please Be Prepared To Provide Pump Serial Numb

Seite 3

Publication 88FN2010 Please Contact Technical Support At 203-736-8890 With Any Additional Questions Please Be Prepared To Provide Pump Serial Numb

Keine Kommentare

Homa Collet Impeller Disassembly and Installation Bedienungsanleitung